FD-60D:Standard Specifications

1. Film Laminated film of all kinds
2. Roll size Maximum width: 1200 mm, Maximum diameter: 800  mm
3. Roll film unwinding unit Horizontal roll film shaft, Definitive tension control system with powder brake equipment
4. Control system  Numerical control system
5. Film feed mechanism Dual AC servo motor drive system *Equipment settings by touch panel. Printing mark detection by mark sensor. 
6. Heat sealer vertical 
movement mechanism		 Single AC servo motor drive system (with functions for setting sealing time)
7. Heat sealers and 
cooling plates
Center seal heat sealer Length 840mm(1) 
Cross Heat Sealer Length 640mm(3)
Side seal heater Length 410mm(4)
Center seal cooling plates Length 510mm(1)
Cross Cooling Plate Length 640mm(1)
8. Pouch making data 
storage function		 Sealing temperature, Pouch making speed, Sealing time, Sealing ratio, Film acceleration, others
9. Initial reject discard function To prevent confusion with badly sealed pouches on start up, film is discarded by double feeding for a selected distance after the cutter.
10. Pouch making capacity Maximum cycles : 240 CPM, maximum film speed : 45 m/min
*Cycles and film speed are calculated separately and are not related.
*Pouch making capacity depends on film material and thickness.
11. Power required
Standard Feed AC servo motor 2×1.5 kw = 3.0 kw
Heat sealer AC servo motor 1×3.2 kw = 3.2 kw
Dancer unwinding motor 1×0.75 kw = 0.75 kw
Center heat sealer 1×2.0 kw = 2.0 kw
Cross Heat Sealer 3×4.8 kw = 14.4 kw
Side heat sealer 4×2.0 kw = 8.0 kw
Control system and other 1.0 kw
Total  (200 V / AC) 32.35 kw
Compressed air required: 0.6MPa (6 kgf/cm2)
Cooling water required : About 10 L/min
12. Area for installation, Weight About 1.9×9.8 m   *Allow extra space for maintenance and operatin       About 4500 kg
13. Optional equipment •Indexing conveyor  •Long Indexing conveyor  •Powder shaker  •Pouch eguipment (various)

* Due to equipment improvement, the above-mentioned figures and appearance may be changed without notice.

Contact Us

Options, in addition to those mentioned above, can be designed and manufactured to suit customer needs. Please consult us without obligation.

If you would like more information about us or any inquiries, please contact in the form.

Contact Us Mail Form