FD-35VSC:Standard Specifications

1. Film Laminated film of all kinds
2. Roll size Maximum width: 850 mm, Maximum diameter: 600 mm
3. Roll film unwinding unit Horizontal roll film shaft, Definitive tension control system with powder brake equipment
4. Control system  Numerical control system
5. Film feed mechanism Trinal AC servo motor drive system *Equipment settings by  touch panel. Printing mark detection by mark sensor. 
6. Heat sealer vertical 
movement mechanism
Single AC servo motor drive system (with functions for setting sealing time)  
7. Pouch making data 
storage function
Sealing temperature, Pouch making speed, Sealing time, Sealing ratio, Film acceleration, others
8. Initial reject discard function To prevent confusion with badly sealed pouches on start up, film is discarded by double feeding for a selected distance after the cutter.
9. Pouch making capacity Maximum cycles : 240 CPM, maximum film speed : 50 m/min
*Cycles and film speed are calculated separately and are not related.
*Pouch making capacity depends on film material and thickness.
10. Power required
Standard Feed AC servo motor 3×1.5 kw = 4.5 kw
Heat sealer AC servo motor 1×5.0 kw = 5.0 kw
Dancer unwinding motor 1×0.4 kw = 0.4 kw
Longitudinal heat sealer 2×4.8 kw = 9.6 kw
Cross heat sealer 5×2.4 kw = 12.0 kw
Control system and other 1.0 kw
  Total  (200 V / AC) 32.5 kw
Option Powder shaker unit 1×0.2 kw
Inverter controlled edge trim winder 1×0.2 kw
Punch trash collector 1×0.4 kw
Compressed air required: 0.6MPa (6 kgf/cm2)
Cooling water required : About 15 L/min
11. Area for installation, Weight  About 1.5×13.0 m   *Allow extra space for maintenance and operatin       About 4100 kg
12. Optional equipment • Coreless trim winder • Indexing conveyor • Powder shaker • Punch equipment (various) • Alarm equipment (various)

* Due to equipment improvement, the above-mentioned figures and appearance may be changed without notice.

Contact Us

Options, in addition to those mentioned above, can be designed and manufactured to suit customer needs. Please consult us without obligation.

If you would like more information about us or any inquiries, please contact in the form.