BH-60DLLS:Standard Specifications
| 1. Film | Laminated film of all kinds | |||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2. Roll size | Body material/Maximum width: 1200 mm, Maximum diameter: 800 mm Bottom material/Maximum width: 150 mm, Maximum diameter: 600 mm Weight: 35 kgf |
|||||||||||||||||||||||||||
| 3. Roll film unwinding unit | Body material/Horizontal shaft, M plate system, Definitive tension control system with powder brake equipment Bottom material/Horizontal shaft, Triangular plate system, Definitive tension control system with powder brake equipment |
|||||||||||||||||||||||||||
| 4. Control system | Numerical control system | |||||||||||||||||||||||||||
| 5. Film feed mechanism | Dual AC servo motor drive system (optional extra servo available) *Equipment settings by touch panel. Printing mark detection by mark sensor. |
|||||||||||||||||||||||||||
| 6. Heat sealer vertical movement mechanism |
Single AC servo motor drive system (with functions for setting sealing time) | |||||||||||||||||||||||||||
| 7. Pouch making data storage function |
Sealing temperature, Pouch making speed, Sealing time, Sealing ratio, Film acceleration, others | |||||||||||||||||||||||||||
| 8. Initial reject discard function | To prevent confusion with badly sealed pouchs on start up, film is discarded by double feeding for a selected distance after the cutter. | |||||||||||||||||||||||||||
| 9. Pouch making capacity | < For standing pouch making > Maximum cycles: 240 CPM, maximum film speed: 30 m/min < For three-side-seal pouch making only > Maximum cycles: 240 CPM, Maximum film speed: 45 m/min for film roll diameters 800 mm to 600 mm, 60 m/min for smaller diameters *Cycles and film speed are calculated separately and are not related. *300 CPM is available by additional equipments. (three-side-seal pouch making) *Pouch making capacity depends on film material and thickness. |
|||||||||||||||||||||||||||
| 10. Power required |
Cooling water required: About 15 L/min |
|||||||||||||||||||||||||||
| 11. Area for installation, Weight | About 2.4×10.5 m *Allow extra space for maintenance and operating / About 5600 kg | |||||||||||||||||||||||||||
| 12. Optional equipment | •Bottom roll film unwinding unit for 300 mm wide bottom material (Bottom material/maximum width: 300 mm, maximum diameter: 600 mm *Pouch gusset depth limited by width of longitudinal heat sealer.) •Bottom material automatic splicing equipment *For others, see page 7 BH-60D specifications. |
* Due to equipment improvement, the above-mentioned figures and appearance may be changed without notice.
Contact Us
Options, in addition to those mentioned above, can be designed and manufactured to suit customer needs. Please consult us without obligation.
- North & South America
- Other
- +1-920-632-7319
- +1-920-632-7361
If you would like more information about us or any inquiries, please contact in the form.