|1. Film||Laminated film of all kinds|
|2. Roll size||Maximum width: 1200 mm, Maximum diameter: 800 mm|
|3. Roll film unwinding unit||Horizontal shaft, M plate system, Definitive tension control system with powder brake equipment|
|4. Control system||Numerical control system|
|5. Film feed mechanism||Dual AC servo motor drive system (optional extra servo available)
*Equipment settings by touch panel. Printing mark detection by mark sensor.
|6. Heat sealer vertical
|Single AC servo motor drive system (with functions for setting sealing time)|
|7. Pouch making data
|Sealing temperature, pouch making speed, Sealing time, Sealing ratio, Film acceleration, others|
|8. Initial reject discard function||To prevent confusion with badly sealed pouchs on start up, film is discarded by double feeding for a selected distance after the cutter.|
|9. Pouch making capacity||< For three-side-seal with zipper pouch making > Maximum cycles: 200 CPM,maximum film speed: 30 m/min
< For three-side-seal pouch making only> Maximum cycles: 240 CPM,
Maximum film speed: 45 m/min for film roll diameters 800 mm to 600 mm, 60 m/min for film roll diameters under 600 mm
*Cycles and film speed are calculated separately and are not related.
*Pouch making capacity depends on film material and thickness.
|10. Power required||
Cooling water required: About 20 L/min
|11. Area for installation, Weight||About 1.8×11.8 m *Allow extra space for maintenance and operating About 6100 kg|
|12. Optional equipment||See BH-60D specifications. •Zipper tape unwinder|
* Due to equipment improvement, the above-mentioned figures and appearance may be changed without notice.